= SmartPhantom meeting: Wednesday 26^th^ June 2019, 13:30 BST =

== Meeting details ==

Teleconference

Phone details:
{{{
UK: 08082 380274
Austria: 0800 006612 

PIN: 5904750902

}}}

Full list of telephone contacts may be found [https://ccap.hep.ph.ic.ac.uk/trac/raw-attachment/wiki/Communication/Z0-Phone-details.pdf here].

== Agenda: ==

1. Notes and actions from [wiki:Research/Instrumentation/Meetings/2019/06-11 last meeting]:
 * **AK:** Establish minimum bending radius.
  * **Done.** Saint Gobain say "30--40 times the fibre diameter", so for us this would lead to the minimum bending radius being 7.5mm -- 10mm.  This seems 'tight' to me.  We should decide specification that we shall adopt.
 * **AK:** Place an order for clear fibre.
  * **Ongoing.**
 * **LC:** Produce drawings for quote.
  * **Done.** Poster in the [wiki:Research/Instrumentation/Documentation/Drawings drawing repository].
 * **HT:** Simulate doublet layers potted in Araldite.
  * **Underway**: Geometry updated so that fibres are embedded in Araldite.  Assumptions made re chemical composition of Araldite. 
 * **HT:** Try and estimate light yield from simulation.
 * **HT:** Find MedAustron rep rate.
  * **Done.** See [raw-attachment:MedAustron-rates.txt note on time structure of beams at MedAustron].
 * **HT:** Inject 90Sr electrons to estimate test-rig light yeild.

2. Design update: LC \\
 * [raw-attachment:190626-SmartPhantom.pdf Slides].

3. Options for manufacture: LC, KL & discussion \\

4. Simulation update: HTL \\

5. Optical readout considerations: JB \\

6. Next steps

7. DONM

7. AoB

----