| | 11 | |
| | 12 | == Actions == |
| | 13 | || 23-01-24-01 || '''All''' to prepare document for the milestone to update the baseline || In progress |
| | 14 | |
| | 15 | == Notes == |
| | 16 | Present: Neil Bliss, Clive Hill, Ajit Kurup, Ken Long, Jaroslaw Pasternak, Rehanah Razak, Will Shields, Colin Whyte\\ |
| | 17 | Apologies: Mark Johnson, Hywel Owen |
| | 18 | |
| | 19 | * Simulations |
| | 20 | * Update from JP: |
| | 21 | * Updated diagram of the ring. |
| | 22 | * Need to add details of the yoke. |
| | 23 | * Contour plot of Total B vs R and opening angle. Plot of B vs opening angle. |
| | 24 | * Need to add the injection line |
| | 25 | * Slides from WS. |
| | 26 | * Update on optics optimisation. |
| | 27 | * Lilli Platt has now finished. |
| | 28 | * GPT solution does not converge for spot sizes sigma=2cm or less. |
| | 29 | * Discussion with Tony Price, suggested smaller spot sizes not needed. |
| | 30 | * KL: We should provide smaller spots sizes but not necessary to deliver in the beam line, can use final focussing elements in the end station. |
| | 31 | * CW: Also having discussions with Tony regarding what measurements should be done for the end station. |
| | 32 | * Discussion on what should go in the 12 month report. |
| | 33 | * Should reference a technical note. |
| | 34 | * NB: Better to add the detail directly into the report for visibility. |
| | 35 | * Engineering |
| | 36 | * Update on the schematic based on WS's comment. |
| | 37 | * Ross Gray is keen on the vertical arrangement of the laser. |
| | 38 | * Investigating having the laser beam at 25 degrees following suggestion from Ross. |
| | 39 | * Discussion on effect of the beam energy due to different incident angle and flexibility for different target production mechanisms. |
| | 40 | * NB would like comments on the schematic. |
| | 41 | * JP: FETS uses wire scanners for profile measurements. |
| | 42 | * Discussion on profile monitor technology. |
| | 43 | |
| | 44 | * Reference design for the bunching cavities. |
| | 45 | * JP: Calculated the details of the cavity. Need to dig these out. |
| | 46 | * Schematic from CH showing the 25 degree target angle. Incoming laser angle is now 40 degrees. |
| | 47 | * Meeting tomorrow on power consumption. |
| | 48 | |
| | 49 | |
