= Design and Integration meeting: 13 February 2024 15:00 GMT =

'''Zoom:''' https://ukri.zoom.us/j/99571436156

== Agenda ==

* Simulations.
* Engineering.
* AOB

== Actions ==

== Notes ==
Present:  Clive Hill, Ta-Jen Kuo, Ajit Kurup,  Ken Long, Jaroslaw Pasternak, Matt Pereira, Rehanah Razak, Will Shields, Colin Whyte \\
Apologies:  Andy Goulden,  Hywel Owen 

	* Simulation
		* Slides from WS:
			* Stage 1 optimisation. Now have a beam (with smaller beta and alpha close to 0) that can get through the injection line and match to the injection conditions.
			*  Gabor lens model in BDSim.
				* Geometry details done.
				* EM Field
					* electric field only.
					* Solenoid field is more complicated to implement.
		* TJK: Will work on optimisation so that the field produced by the trim coils add to the field of the main coil.
			* Looking at checking JB's code Fixed Field.
		* Slides from JP:
			* Including correctors and beam profile monitors in the injection line.
			* Assumptions for the gap calculation.
				* This will give the good field region needed and then can do the magnet simulation.
			* Discussion on the gap size.
			* TJK concerned about the dB/B requirement. 
			
	* Engineering
		* Template for the documents for milestones 6 and 7.
		* Power requirements for the magnets.
		* Discussion on power requirements for the FETS FFA magnet and comparison with LhARA.
		
	* AOB
		* KL: How is the JAI work is going?
			* MP: Looking at the conceptual design of stage 1 beam delivery in the end station. Lattice design and spot sizes and looking at different magnet options. To be presented in about 5 weeks.