Changes between Version 1 and Version 2 of Research/LhARA/RadiationBiology/Meetings/2024-08-23


Ignore:
Timestamp:
Aug 23, 2024, 12:22:58 PM (3 months ago)
Author:
jmm119
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Research/LhARA/RadiationBiology/Meetings/2024-08-23

    v1 v2  
    55== Agenda ==
    66
    7 1. Updates from DL (H.O, B.S, K.L):
     71. Updates from DL (H.O, B.S, K.L):\\
    88
    99Materials provided by STFC:
    10 
    11106 quadrupoles (with option to go down)
    1211Gradient 150 T/m
    … …  
    2322Thread size discussed- decided on M6 as preference
    2423Maximum frame size 130mm across
    25 
    26 
    2724Likely quadrupole cost 2k per quad
    2825Budget available around 12k
    … …  
    3330Colin Whyte to arrange transport to Strathclyde
    3431
    35 
    36 In-vacuum
    37 
    38 
    3932Materials provided by Strathclyde University:
    40 
    41 
    4233Mounting plate arrangement within vacuum chamber - probably dead reckoning onto a single plate with perhaps dowels and discrete surface plate holes.
    4334Description of alignment method, possibly laser through the aperture with Mylar targets?
    … …  
    4738
    4839Timeline:
    49 
    5040Quotes end of August
    5141Review early Sep with Ross and Clive Hill (+Ben etc)
    … …  
    5949Discussion to aim for end of November mounting to ensure beam time window not missed.
    6050
    61 2. Discussion on quad attachment/alignment/mounting (All)
     512. Discussion on quad attachment/alignment/mounting (All) \\
    6252
    6353R.G. proposes optical rail to mount all components on so it can be lifted vertically without disturbing Thompson. Weight calculations for each quad (rough estimate of a few lbs per quad, collimators assumed to be light) to be done to check weight baring.
    6454
    65 3. Simulation updates (J.M)
     553. Simulation updates (J.M) \\
    6656
    67 BDSIM initial simulations show somewhat a similar design to the linear optics. Proper side by side analysis is to be completed
     57BDSIM initial simulations show somewhat a similar design to the linear optics for pencil beam with 0.3MeV spread. Proper side by side analysis is to be completed for a point source with limited spread. R.G. to send parameters from the SCAPA line both in input csv and real time readings from the beam for input into Linear Optics and BDSIM.  [raw-attachment: BDSIM- PoPLaR Visuals.pdf BDSIM Visuals]
    6858
    69594. AOB \\