Design and Integration meeting: 13 February 2024 15:00 GMT

Zoom: ​https://ukri.zoom.us/j/99571436156

Agenda

• Simulations.
• Engineering.
• AOB

Actions

Notes

Present: Clive Hill, Ta-Jen Kuo, Ajit Kurup, Ken Long, Jaroslaw Pasternak, Matt Pereira, Rehanah Razak, Will Shields, Colin Whyte
Apologies: Andy Goulden, Hywel Owen

• Simulation
  • Slides from WS:
    • Stage 1 optimisation. Now have a beam (with smaller beta and alpha close to 0) that can get through the injection line and match to the injection conditions.
    • Gabor lens model in BDSim.
      • Geometry details done.
      • EM Field
        • electric field only.
        • Solenoid field is more complicated to implement.
  • TJK: Will work on optimisation so that the field produced by the trim coils add to the field of the main coil.
    • Looking at checking JB's code Fixed Field.
  • Slides from JP:
    • Including correctors and beam profile monitors in the injection line.
    • Assumptions for the gap calculation.
      • This will give the good field region needed and then can do the magnet simulation.
    • Discussion on the gap size.
    • TJK concerned about the dB/B requirement.

• Engineering
  • Template for the documents for milestones 6 and 7.
  • Power requirements for the magnets.
  • Discussion on power requirements for the FETS FFA magnet and comparison with LhARA.

• AOB
  • KL: How is the JAI work is going?
    • MP: Looking at the conceptual design of stage 1 beam delivery in the end station. Lattice design and spot sizes and looking at different magnet options. To be presented in about 5 weeks.