SmartPhantom meetings: Wednesday 27^th November 2019; 11:00 GMT

Notes:

1. Notes and actions from last meeting:
   • KL: Liaise to develop concept for polishing.
     • Stands.

2. Mechanical design/manufacture update: LC
   • Gluing procedure; see:
     • https://ccap.hep.ph.ic.ac.uk/trac/attachment/wiki/Research/Instrumentation/Meetings/2019/11-27/SmartPhantom%20Gluing%20Procedure.docx
     • https://ccap.hep.ph.ic.ac.uk/trac/attachment/wiki/Research/Instrumentation/Meetings/2019/11-27/image002.jpg https://ccap.hep.ph.ic.ac.uk/trac/attachment/wiki/Research/Instrumentation/Meetings/2019/11-27/image004.jpg
     • https://ccap.hep.ph.ic.ac.uk/trac/attachment/wiki/Research/Instrumentation/Meetings/2019/11-27/A2012%20-%20Air%20Products%20-%20Ancamide%20506.pdf
     • https://ccap.hep.ph.ic.ac.uk/trac/attachment/wiki/Research/Instrumentation/Meetings/2019/11-27/A7010%20-%20Astor%20Stag%20-%20SER%20300.pdf
     • https://ccap.hep.ph.ic.ac.uk/trac/attachment/wiki/Research/Instrumentation/Meetings/2019/11-27/ARALDITE%202011.pdf
   • File for printing of boot:
     • https://ccap.hep.ph.ic.ac.uk/trac/attachment/wiki/Research/Instrumentation/Meetings/2019/11-27/TD-2580-0165.stl
   • Design for sample and ionisation-chamber holder. *https://ccap.hep.ph.ic.ac.uk/trac/attachment/wiki/Research/Instrumentation/Meetings/2019/11-27/image001.jpg

We discussed next steps for manufacture and agreed to start with manufacture of connectors, lightguide, and boot assembly.

3. Single-fibre test setup: HTL
   • See slides.

4. Schedule revision discussion: All
   Important to address winding of first scintillating-fibre prototypy. Agreed to start with light-guide manufacture.

5. Spend: outstanding requirement: All
   No update.

6. Next steps: All
   See above.

7. DONM
   Wed. 04Dec19.

8. AoB
   None.

---

Meeting details

Venue: 1105 Blackett Laboratory. Videoconference using the Vidyo system.

Connection details:

Please join the VIDYO meeting by clicking this link: ​https://vidyoportal.cern.ch/join/SPJlsfAOEV

---

Agenda:

1. Notes and actions from last meeting:
   • KL: Liaise to develop concept for polishing.

2. Mechanical design/manufacture update: LC

3. Single-fibre test setup: HTL

4. Schedule revision discussion: All
   Important to address winding of first scintillating-fibre prototypy.

5. Spend: outstanding requirement: All
   

6. Next steps: All
   

7. DONM
   

8. AoB
   

---